1. You are currently not signed in. If you are already a registered user Please log in to get the full benefit from this site. If not, why not register and gain full access to our wonderful forums, view topics, make posts, and more! So if your not already a user, you can register by simply clicking the button to the right of this notice.

Monthly Meet 7th Oct

Discussion in 'Biker events' started by BlackHornet, Oct 4, 2015.

  1. BlackHornet

    BlackHornet Look before you turn Staff Member Moderator +

    Messages:
    7,985
    This Wednesday evening 7/10/15 is the monthly meet at the Oak and Ivy in Hawkhurst
     
    Jon Weston and Russell like this.
  2. Jon Weston

    Jon Weston Moderator Staff Member Moderator + Site Supporter

    Messages:
    420
    Will be there if not required at work!
     
  3. Panel Man

    Panel Man Secret prototype +

    Messages:
    1,830
    Me too. My monthly injection of conversation with reasonable people and the chance to listen to an occasional bike :)
     
  4. lammyR6

    lammyR6 Moderator Staff Member Moderator + Site Supporter

    Messages:
    5,554
    I'll be there this time :)
     
    Panel Man likes this.
  5. Roadwart

    Roadwart Administrator Staff Member Administrator +

    Messages:
    6,720
    We`ll be there. :thumbsup:
     
  6. Tony

    Tony Moderator Staff Member Moderator +

    Messages:
    1,166
    I'm going....
     
  7. Jon Weston

    Jon Weston Moderator Staff Member Moderator + Site Supporter

    Messages:
    420
    On my own @ pub :cry:
     
  8. DAVE B

    DAVE B British Superbike +

    Messages:
    182
    Good to catch up hopefully see you out at weekend.
     
    Tony likes this.
  9. BlackHornet

    BlackHornet Look before you turn Staff Member Moderator +

    Messages:
    7,985
    yeah a nice night :thumbsup: feeling stuffed now :D
     
  10. Roadwart

    Roadwart Administrator Staff Member Administrator +

    Messages:
    6,720
    Good to see you all. Thanks again to @Jon Weston for the stickers. Top job that man!
     
    lammyR6 and Jon Weston like this.
  11. Jon Weston

    Jon Weston Moderator Staff Member Moderator + Site Supporter

    Messages:
    420
    Last edited: Oct 7, 2015
    BlackHornet, lammyR6 and Panel Man like this.
  12. lammyR6

    lammyR6 Moderator Staff Member Moderator + Site Supporter

    Messages:
    5,554
    Great to see everyone yesterday. Always puts a smile on my face :ghug:
     
  13. Panel Man

    Panel Man Secret prototype +

    Messages:
    1,830
    Thanks for figuring these out, Jon. What size are the mugs? I detected support from Tony for at least an option for a veritable balti of a bucket as well as more normal (read 'common') sizes. And the prices seemed on the steep side unless they are jolly good quality indeed. I've seen reportedly high quality so-called corporate branding mugs for nearer £4 each provided you order 100 at a clip. Maybe that sounds a little ambitious, but I reckon it may not be impossible: if twenty folks order sets of half a dozen ("Amaze your friends, break the ice at parties") we are there.

    RW: it strikes me that Mods may need to figure out a procedure but I'd be happy to do some research on top of Jon's find above to ensure we have a wide range of choice. Thoughts, anyone?
     
    Tony likes this.
  14. Jon Weston

    Jon Weston Moderator Staff Member Moderator + Site Supporter

    Messages:
    420
    Cafepress do a custon printed 15oz large mug for £17.50 inc del. Bought one a few years ago, if the same one, it was bigger than a standard mug....not sure if worth £5.50 delivery
     
  15. Jon Weston

    Jon Weston Moderator Staff Member Moderator + Site Supporter

    Messages:
    420
    The Spreadshirt mug is an acceptable size for a cuppa - measured it up against a mug here (3.74"h 3.15"d). I do use a mahoosive mug at work (4.5"w 3.5"d)
     
  16. Russell

    Russell Race Rep +

    Messages:
    851
  17. Russell

    Russell Race Rep +

    Messages:
    851
    Forgot to say that Tony is definitely a big mug...kinda guy
     
  18. Roadwart

    Roadwart Administrator Staff Member Administrator +

    Messages:
    6,720
    I have already looked into mugs, just didn`t get a chance to speak to Richard about this.

    I appreciate the effort Jon but those spreadshirt prices are VERY expensive considering the small print area on the mugs.

    Std 300ml Earthenware mug (Product Dimensions dia.80 x h95 x 115 including handle. Print area 220 x 92mm) , Dishwasher proof prints, Full Colour Dye Sublimation Printed £4 each (excluding origination costs which the club would fund) based on a run of 50.

    450ML Stainless Steel Travel Mug with plastic interior. Colours: Silver or Blue, Green and Red at extra cost. Size: 155 x 80mm dia. Print area 170 x 45mm. Printing in one colour and one position printed or engraved £6.57 printed or £7.03 engraved (excluding origination costs which the club would fund) based on a run of 25.

    I`m more than happy to order a run if there`s enough interest to take 25% of the cost of the initial order & store the rest to hand out as & when required.
     
    Last edited: Oct 8, 2015
    Jon Weston likes this.
  19. Tony

    Tony Moderator Staff Member Moderator +

    Messages:
    1,166
    Good to see people.....
    :moon::witch::hah:
     
  20. Jon Weston

    Jon Weston Moderator Staff Member Moderator + Site Supporter

    Messages:
    420
    Give me a shout and I'll get the artwork proof originated as much as posible.

    I'll be up for 2 or 3 mugs!
     
    Roadwart likes this.

Share This Page

  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice